Exmark OCD01 Lawn Mower User Manual


 
2
1.3.2 The use of personal protective equipment, such as (but not limited to) protection
for the eyes, ears, feet, and head is recommended.
CAUTION
POTENTIAL HAZARD
The mower that the OCD01 attaches to
produces sound levels in excess of 85
dBA at the operator’s ear when in
operation.
WHAT CAN HAPPEN
Exposure to sound levels of 85 dBA or
above for extended periods of time can
cause hearing loss.
HOW TO AVOID THE HAZARD
Wear hearing protection when operating
this machine.
1.3.3 While mowing, always wear substantial footwear and long trousers. Do not
operate equipment when barefoot or when wearing open sandals.
1.3.4 Thoroughly inspect the area where the equipment is to be used and remove all
stones, sticks, wires, bones, and other foreign objects which may damage the
equipment or cause personal injury to the operator or bystanders.
1.4 OPERATION
Although hazard control and accident prevention are partially dependent upon the
design and configuration of the equipment, these factors are also dependent
upon the awareness, concern, prudence, and proper training of the personnel
involved in the operation, transport, maintenance, and storage of the equipment.
It is essential that all Operator Safety Mechanisms be connected and in operating
condition prior to use for mowing.
1.4.1 Give complete, undivided attention to the job at hand.
1.4.2 Mow only in daylight or good artificial light, keeping away from holes and hidden
hazards. NEVER carry passengers.
DO NOT operate the mower when children or others are in the area.
1.4.3 When feasible, avoid operating the equipment in wet grass.
1.5 SAFETY SIGNS
1.5.1 Keep all safety signs legible. Remove all grease, dirt and debris from safety
signs and instructional labels.
1.5.2 Safety signs must be replaced if they are missing or illegible.
1.5.3 When new components are installed, be sure that current safety signs are
affixed to the replaced components.
1.5.4 New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.