Filter
Top Products
8
9
USER MANUAL WEATHERTRACKERFR800
SETTING ALERT MODE (SIREN or VOICE)
Turn off the radio and press the MENU button. SETUP TIME appears in the
display. Press the button twice. ALERT appears in the upper part of the
display, with SIREN or VOICE to its right. Press the button and SIREN
or VOICE flashes. Press the buttons to select the one that you wish
to hear when an ALERT is activated. Press MENU twice to exit and save
the setting.
While the alert SIREN is activated, you can press the ON/OFF ALERT
button at the top of the radio to turn it on or off.
SETTING S.A.M.E.
Codes in the US, CLC Codes in Canada
• S.A.M.E. = Specic Area Message Encoding
• CLC = Canadian Location Codes
A six-digit code instructs the radio only to receive an ALERT when the
code is programmed in. There are far too many S.A.M.E and CLC codes
to include them all in this manual. We therefore provide the following
to assist you in looking up the code for your area.
Look up a United States county code at the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at:
http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/index_e.cfm
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be set
to receive ALL coded information sent from any transmitter, if you’re
within range. When you set codes, it will only pick up alerts when you’re
in that county or within reception distance of the signal. ALL, MULTI
or SINGLE COUNTY will appear in the lower left side of the display,
depending on how you have set it.
If you want to receive all alerts:
To set single or multiple codes:
Select SINGLE below if you only want to enter a code for a single area.
Enter MULTI if you wish to enter multiple codes for different areas.
Remember, you must be in that area to receive the ALERT for the area.
1. Turn the radio off.
2. Press the MENU button to enter the setting menu.
3. Press the buttons to select COUNTY at the top of the display
with SINGLE, MULTI or ALL to the right of it.
4. Press the button to make the wording to the right
of COUNTY flash.
5. Press the buttons to select SINGLE or MULTI.
Continues on next page...
SIREN
SINGLE
COUNTY
1
ALERT
Turn POWER off
ALERT
SIREN
SINGLE
COUNTY
6
Press MENU twice to
exit and save the setting
ALERT
SIREN
SINGLE
COUNTY
2
Press MENU
3
ALERT
SIREN
SINGLE
COUNTY
Press and
choose COUNTY
4
ALERT
SIREN
SINGLE
COUNTY
Press and the
display will flash
ALERT
SIREN
SINGLE
COUNTY
5
Press until
COUNTY - ALL
Alert / WB ( Weather alert button)
Alarm ON / OFF
Snooze
WB (Weather Band)
AM / FM Tuner Band
Alert ON / OFF
Power ON / OFF
Antenna
Alert Indicator
DC in
Audio in
Warning Indicator
Watch Indicator
Advisory Indicator
Menu