Filter
Top Products
8
Operating the appliance
Switching the appliance on and off
Selecting the cooking zone
3 The decimal point is displayed by the selected cooking zone. Then a heat
setting must be set for this cooking zone within 6 seconds, otherwise it
must be re-selected.
Selecting the heat setting
3 After selecting the cooking zone, briefly release the sensor field .
3 After 6 seconds with no input the selection is cancelled and the decimal
point goes out. To set the required cooking zone again, make another selec-
tion.
Control panel Display
Switch on Touch for 2 seconds. / Decimal point flashes
Switch off Touch for 1 second
/ none
Control panel Display
Select Touch Decimal point illuminates
Control panel Display
Increase Touch to
Decrease Touch to
Switch off Touch and at the same time