Filter
Top Products
7
CONTROLS
Engine Switch
To start and stop the engine.
Switch position:
OFF: To Stop the engine. Key can be
removed/inserted.
ON: To run the engine after starting.
START: To start the engine by turning
the starter motor.
Return the key to the ON position once the engine has started. Do not use the starter for
more than 5 seconds at a time. If the engine fails to start, release the switch and wait 10 seconds
before operating the starter again.
Recoil Starter
To start the engine. Pull the starter grip lightly
until resistance is felt. then pull briskly.
NOTICE
Do not allow the starter to snap
Back against the engine. Return it gently to
prevent damage to the starter.
Fuel Valve
The fuel valve is located between the fuel
tank and carburetor. When the valve lever
is in the ON position, fuel is allowed to flow
from the fuel tank to the carburetor. Be sure
to return the lever to OFF after stopping the
engine.