Filter
Top Products
4" & 5" PTO Chipper Specs
Models CH4540 (73454), CH5540H (74554)
20" [51cm] DIAMETER DISC
20" [51cm] x 1.25 [3.175cm] thick rotor disc weighs
140 lbs. [63.5kg], machine balanced.
PTO DRIVE
The PTO Drive, category one 3-point that
weighs 600 lbs. [272kg.] Belt Driven.
FOUR CHIPPING BLADES
All have the same reversible chipper blades, heat treated
chipper steel with a chrome content. 3.125" x .25"
ADJUSTABLE, 4-WAY ANVIL
To ensure good quality chipping ability.
DOUBLE BANDED BELT DRIVE
HYRAULIC FEED SYSTEM on Model CH5540H ONLY
•15" Diameter feed roller
•Maximum capacity of 3 Gallons/minute at 2500 PSI
•Electric/Hyrdaulic system to control feed roller direction
MANUAL FEED SYSTEM on Model CH4540 ONLY
•45-Degree chipping blade edge angle helps
pull the logs and limbs into the 73454.
EASY ACCESS DISC
The rotor is accessible through the hinged disc cover by remov-
ing one bolt, which exposes one half of the disc for easy access to
the chipping blades and for easy inspection and maintenance.
HEAVY-DUTY CONSTRUCTION
•.25" Thick steel throughout, seam welded.
INTEGRATED DISCHARGE CHUTE
Put the chips where you want them with the dedicated blower. 360°
rotatable, 8" [20cm] diameter steel tubing with adjustable spout
cap allows you to put the chips where you want them the rst time.
LARGE FEED HOPPER
Feed your prunings or limbs into a 27" x 28" [68.6cm x 71.1cm] open-
ing.
CHIPPER CHUTE
Opening is 5.5" x 7" [14cm x 17.8cm] (for side limbs)
MAXIMUM FEED SIZE
• CH4540 (73454) – 4"
• CH5540H (74554) – 5"
2" [5.08CM] BALL COUPLER
WEIGHT
•CH4540 (73454) PTO CHIPPER Weighs 600lbs.
•CH5540H (74554) PTO CHIPPER Weighs 980lbs.
SAFETY
• Meets all ANSI safety standards.
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com
Fax: 701.282.9522