Echo Bear Cat 76854 Chipper User Manual


  Open as PDF
of 2
 
9" Orchard Chipper Specs
A Breed Above the Best
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com • Fax: 701.282.9522
30" [76CM] DIAMETER DISC
• Thirty inch diameter by 1.25" [3.175cm] thick disc
that weighs 275 lbs. [125kg]
• Balanced for smooth operation.
• Disc turns at 1500 RPM.
16 CHIPPING BLADES
• Spaced on the disk to provide maximum coverage
and produce an extremely small chip
FOUR EDGE ADJUSTABLE ANVIL
• To insure good chipping ability.
• 9.25" long X 3.5" wide X .625" thick.
[23.5cm x 8.9cm x 1.6cm]
EASY ACCESS DISC
• The disc is accessible through the hinged disc
cover, which exposes one-half of the disc for easy
access to the chipping blades and for easy clean
out.
INTEGRATED DISCHARGE BLOWER
• Put the chips where you want them, directly
onto the ground.
• Position the chute in multiple positions.
• Low profile discharge chute prevents chips from
damaging branches.
HEAVY-DUTY CONSTRUCTION
• .375" [9.5mm] thick steel face plate on the disc
housing;
• .25" [6.35mm] thick steel on the wrap around
with welded construction
SAFETY
• Meets all applicable ANSI safety standards.
BEARINGS
• Two 1.75" [4.45cm] greasable bearings with 4
bolt cast flanges.
FEED CHUTE
• Opening 30.25" X 30.75" [76.8cm x 78.1cm],
tray 28.31" [71.9cm] off the ground.
• Feed table is 38" [96.5cm] long.
FEED THROAT
• 9" X 9" [22.86cm x 22.86cm]
90° FEED ANGLE
• Quicker chipping because you are cutting
through less wood.
MAXIMUM FEED SIZE
• 9" [20cm] for model 76854
FEED SYSTEM
• Self-contained with infinate feed rate settings.
• Single 15" [38cm] diameter feed roller with feed
rate of 0-150fpm [0-45 meters/min].
• 45 cu. in. [737cc] hydraulic motor.
• 1750 psi [119 atm] operating pressure.
FOLD DOWN FEED TRAY IS
STANDARD ON #76854
• Extends feed table by 30" [76.2cm].
ELECTRONIC FEED SENSOR
AND HOUR METER
• Digital, programmable electronic feed sensor with
hour meter. Hour meter has readout of total hours
and daily hours.
Model 76854
 previous