Filter
Top Products
6
CS-450
PACKING LIST
The ECHO product you purchased has been fac-
tory pre-assembled for your convenience. Due to
packaging restrictions, guide bar and saw chain
installation and other assembly may be necessary.
After opening the carton, check for damage. Im-
mediately notify your retailer or ECHO dealer of
damaged or missing parts. Use the packing list to
check for missing parts.
Warranty registration
card
Assembly Tool (s)
ECHO Power Blend X™
2-stroke oil sample
Instruction manual
Safety manual
ECHO Chain Saw
Saw chain
Guide bar
Kick Guard®
CS-450
Spiked Bumper
5x12 mm Bolts
Emission Data
An Emission Control Label is located on the engine.
(This is an EXAMPLE ONLY, information on label varies
by engine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance
procedures are followed as listed in the Maintenance Section of this manual.
Emission control (Exhaust & EvaporativE)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM (en-
gine modication) and, if the second to last character
of the Engine Family on the Emission Control Informa-
tion label (sample below) is “C”, “K”, or “T”, the emis-
sion control system is EM and TWC (3-way catalyst).
The fuel tank/fuel line emission control system is EVAP
(evaporative emissions). Evaporative emissions for
California models may only be applicable to fuel tanks.