Filter
Top Products
PPT-280 ASSEMBLY
X7702091009 15
© 02/2014 ECHO Inc.
5. Connect 2 ignition stop leads (C,D) from throttle cable
tubing to 2 ignition leads (C,D) on engine.
6. Gather ignition wires and position behind air filter case.
7. Install air filter and cover.
Cutting Attachment to Drive Shaft Installation
Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury
may result
1. Loosen the two (2) screws (A) and remove locator screw (B)
on cutting attachment.
2. Loosen clamp knob (E) turning counter clockwise.
C
D
A
B
F
E