Echo PPT-265/265H/265S Pole Saw User Manual


  Open as PDF
of 4
 
2
4 foot eXtension installation
Parts Required: 1220mm (4 Foot) Extension
WARNING
The Saw Chain is sharp! Always wear gloves when handling the
cutting attachment, otherwise serious personal injury may result.
1. Loosen the two (2) screws (A), and locator screw (B) on cutting
attachment, and remove the cutting attachment.
2. Loosen clamp knob (C) turning counter clockwise.
3. Pullaluminumhousing(D)outofberglasshousing610mm(24
in.),thenslide(D)backintoberglasshousingapproximately
305mm (12 in.) exposing inner drive shaft (E).
4. Loosen the extension clamp knob (F) turning counter clockwise.
5. Align inner drive shaft adapter (G) with extension shaft (H).
NOTE
Assure locator hole in extension shaft is oriented on same side as
locator hole in aluminum housing (D).
6. Alignridgesonaluminumhousing(D)withgroovesinextension
clamp.
7. Slide extension clamp onto aluminum housing (D) until
extension stops.
8. Tighten extension clamp knob (F) securely.
G
H
D
D
B
a
F
F
C
C
D
D
D
12 in.
E
F
G
 previous next