Echo PPF-225 Pole Saw User Manual


 
PPF-225 SAFETY
X7502308106 9
© 09/2013 ECHO Inc.
Equipment
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved
attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices,
attachments or accessories which have not been tested and approved by ECHO. Read and comply
with all safety instructions listed in this manual and safety manual.
Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.
Guide Bar and Saw Chain
Check that the cutting attachment, guide bar, and saw chain is firmly attached and in safe operating
condition.
Use only one Echo-approved extension on the pruner.
Do not hit rocks, stones, tree stumps, and other foreign objects with the saw chain.
Do not cut into the ground with the saw chain.
If cutting attachment end strikes an obstruction, stop engine immediately and inspect saw chain for
damage.
Do not operate with a dull, fractured, or discolored saw chain.
Remove all foreign objects from work area.
Always cover the guide bar and saw chain with guide bar cover during transportation and for storage.
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings.
ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit.
DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running. Moving parts may not be visible through
openings.
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or
leaks are found, do not use unit, otherwise serious personal injury or property damage may occur.
Have unit repaired by an authorized servicing dealer before using.