Echo PE-225 Edger User Manual


 
12 X7722272308
© 2/2014 ECHO Inc.
CONTENTS PE-225
CONTENTS
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging
restrictions, shield installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or
missing parts. Use the contents list to check for missing parts.
____ - 1 - Power Head
____ - 1 - Drive Shaft Assembly
____ - 1 - Operator’s Manual
____ - 1 - Safety Manual
____ - 1 - Warranty Registration Card
____ - 1 - Emission Control Warranty Statement
____ - 1 - Echo Power Blend X
TM
2-Stroke Oil Sample
____ - 2 - split pin
____ 1 - Safety Glasses
___ - Assembly Tool(s)
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time
of publication, but are subject to change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
Operator’s Manual
X7722271404 / X772000164
© 4/2011 ECHO Inc.
X7722271404 / X772000164
PE-225
Power Edger
Burn Hazard
The muffler or catalytic muffler and surrounding cover may become extremely hot.
Always keep clear of exhaust and muffler area, otherwise serious personal injury may occur.
The engine exhaust from this product contains chemicals known to the State of California to cause cancer.
birth defects or other reproductive harm.
Read rules for safe op eration and instructions carefully. ECHO provides an Operator’s Manual
and a Safety Manual. Both must be read and understood for proper and safe operation.