Filter
Top Products
10 X7501183702
© 03/2013 ECHO Inc.
DESCRIPTION PB-265LN
1. SPARK PLUG - Provides spark to ignite fuel mixture.
2.
SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST -The muffler controls
exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the
muffler. Keep exhaust area clear of flammable debris
3. RECOIL STARTER HANDLE - Pull recoil handle slowly until recoil starter engages, then quickly and
firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will
occur.
4. FUEL TANK CAP - Covers and seals fuel tank.
5.
FUEL TANK - Contains fuel and fuel filter.
6. AIR CLEANER - Contains replaceable air filter element.
7. HANDLE - Rotates downward for throttle control access. Spring loaded for flexible operation.
8. THROTTLE POSITION LEVER/STOP SWITCH - Combination stop switch and variable speed throttle
lever. When the lever is moved all the way forward the blower is at Wide Open Throttle (W.O.T.). When
the lever is moved rearward to detent, the blower is at idle. When the lever is moved rearward past the
idle detent the blower will stop.
9.
CHOKE - Choke is located on the side of the air cleaner. Move choke lever to "COLD START" ( ) to close
choke for cold starting. Move choke lever to "RUN"( ) position to open choke.
10. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from
the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge
bulb an additional 4 or 5 times.
11. SHOULDER HARNESS - Used to support unit on operator's back. The straps are adjustable.
12. BLOWER PIPES - Exclusive positive locking system.
13. FLEXIBLE PIPE - Allows for full range of movement.
14. STICK HANDLE - Used by operator to direct air flow.