Filter
Top Products
18
Cleaning Cylinder Fins
1. Remove engine cover (six screws), pull cover away from engine.
Clean cylinder fins to allow cooling air to pass freely.
EXHAUST SYSTEM
Spark Arrestor Screen
Level 2.
Tools required: Cross Head Screwdriver, 3 mm Hex Wrench,
Soft metal brush,
Parts Required: Spark arrestor screen P/N 14586240630,
(1ea) Gasket P/N V104000032, V104000350
IMPORTANT
Carbon deposits in muffler will cause a drop in engine output and
overheating. Spark arrestor screen must be checked periodically.
1. Remove engine cover (six screws).
2. Remove exhaust deflector (A), spark arrestor cover (B), gaskets
(C) and (D), and spark arrestor screen (E) from muffler. Replace
screen if plugged with carbon deposits.
3. Install spark arrestor screen, gaskets, and covers.
4. Install engine cover.
C
B
A
D
E