Filter
Top Products
12
SPECIFICATIONS
PAS Rapid Loader
TM
Attachment
NOTE Install and use U-Handle when operating any model with blade.
Shaft Length ------------------------------------------------838 mm (33 in.)
Attachment Width -----------------------------------------178 mm (7 in.)
Attchment Height ------------------------------------------ 229 mm (9 in.)
Weight (dry) w/blade -------------------------------------- 1.36 kg. (3.1 lb.)
Drive Shaft -------------------------------------------------- 6.35 mm (1/4 in.) Flex Shaft
Rotating Direction ----------------------------------------- Counter-clockwise viewed from the top
Cutter Head ------------------------------------------------- Rapid Loader
TM
head (2-lines) with .095 Cross Fire
TM
Line
STORAGE
Storage Hook Installation
1. Insert small end of hook into locating hole on attachment shaft.
2. Slide plastic cap onto end of attachment shaft.