Filter
Top Products
12 X7702094704
© 08/2013 ECHO Inc.
ASSEMBLY 99944200615
1. Remove wing nut (A), washer (B), and bolt (C).
2. Snap the shield over the bearing housing.
3. Install bolt (C), washer (B), and wing nut (A).
Nylon Line Head Installation/Removal
1. Align locating hole in upper plate with hole in bearing
housing and insert 5 mm (3/16 in.) diameter locking tool (A).
2. Place large washer (B) then line head (C) on threaded shaft,
followed by small metal washer (D) and locknut (E).
3. .Install 3/8-24 locknut using 14.5 mm (9/16 in.) wrench.
Turn locknut clockwise, and tighten securely.
Remember to remove the locking tool.
4. To remove line head, reverse assembly instructions.
A
B
C
A
B
C
E
D
A
B
C
A