Filter
Top Products
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT
OPERATOR'S MANUAL
7
1. CUTTING BLADES - Double reciprocating blades mounted to a blade support bar. Double sided blades, are capable
of cutting on either side of the blade.
2. LOWER DRIVE SHAFT ASSEMBLY - Includes the Gear Housing assembly, Flexible Drive Cable, Blade and Safety
Decals.
3. FLEXIBLE DRIVE CABLE - Cable end fits into upper drive shaft coupler. Lubricate drive cable every 25 hours with
ECHO
®
LUBE
TM
grease.
4. FRONT DRIVE SHAFT GRIP - Cushioned hand grip for gripping drive shaft assembly.
5. HAND GUARD / BLADE LOCK - Locks blade in place for travel / storage. Always assure blade cover is installed
when locking blade.
6. BLADE ADJUSTMENT HANDLE - Provides secure hand grip for adjusting cutting blade angle.
7. BLADE INDEXING RING- Pull ring out and turn 1/4 turn to lockout position when adjusting blade angle.
8. BLADE COVER - Used to cover blades during transport and storage. Remove blade cover before operating unit.
CONTENTS
The ECHO product you have purchased has been factory pre-assembled for your convenience.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts.
Use the contents list to check for missing parts.
_____ 1 - Articulating Hedge Clipper Attachment
_____ 1 - Operator's Manual
_____ 1 - Hedge Clipper Safety Manual
_____ 1 - Warranty Registration Card
_____ 1 - Blade Cover
_____ 1 - Storage Hook Assembly