Filter
Top Products
99944200465 OPERATION
© 3/2015 ECHO Inc.
X7702096504 13
OPERATION
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a completestop before removing obstructions, clearing debris, or servicing unit. Allow
unit to cool before performing service.
Operation Techniques
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position
unit so that exhaust is directed away from your face and body.
Before operating unit, be sure to read and understand the entire Operator’s Manual to avoid the
chance of serious personal injury.
Note: For best results, use BRD redefining blade (provided with
unit) ONLY for redefining existing bed edges. For edging
next to curbs, sidewalks, or other hard surfaces, remove
redefining blade and install ECHO Approved Premium
Power Edger blade. Use of redefining blade next to hard
surfaces, can lead to premature blade wear.
1. Always grip throttle handle with right hand, and support
handle with left hand.
2. Before using Redefiner, check the area and remove objects
that could be thrown.
3. Carefully plan your direction of travel. Walk outside of bed.
Be aware of curbs or other obstacles.
4. Work with body turned toward engine as shown. Travel in
direction of arrow, pulling rather than pushing unit. Carefully
watch bed edge and direction of travel. Do NOT walk
backwards.
Do not walk towards gear case while operating unit with redefining blade installed, otherwise poor
performance or damage to unit could occur.
For more information
scan this QR code.