Filter
Top Products
12
B
1. Push silver button on shutoff valve (B) to disengage valve, and
prevent chemical flow.
2. Start blower. (See PB-200 operator’s manual for step by step
instructions on starting and stopping.)
3. Put backpack on back, and adjust straps for comfortable fit.
4. Set blower to half speed or higher.
5. Connect tank hose to clear hose on blower at quick disconnect
valve (A).
NOTE
Assure blower is operating at half speed or higher before engaging
shutoff valve (B).
6. Engage shutoff valve (B) to start chemical flow, and begin
spraying.
NOTE
Chemical flow is gravity-fed. Flow will begin when shutoff valve is
connected and backpack is positioned higher than blower.
A
B
Stopping Procedure
1. Push silver button on shutoff valve (B) to disengage valve and
stop chemical flow.
2. Turn blower engine off (Refer to PB-200 operator’s manual.)
3. Disconnect quick disconnect valve (A).
B
A