Echo CS-3000 Type 1E, CS-3400 Type 1E, CS-3450 Type 1E Chainsaw User Manual


 
6
50
CS-3450
CS-3000
CS-3400
FUEL AND LUBRICANT
FUEL STATEMENT
GASOLINE - Use 89 Octane (R+M/2) gasoline or gasohol
known to be good quality. Gasohol may contain maximum 10%
ethyl (grain) alcohol or 15% MTBE (methyl tertiary-butyl ether).
Gasohol containing methy (wood) alcohol is not approved.
OIL - ECHO brand premium two-stroke 50:1 oil is preferred. Mix
oil and gasoline/gasohol according to instructions on the oil
container label.
MIXING - Follow directions on the oil container.
IMPORTANT
Stored fuel ages. Do not mix more fuel than you expect to use
in thirty (30) days, ninety (90) days when a fuel stabilizer is
added.
Stored two-stroke fuel may separate. ALWAYS shake fuel
container thoroughly before each use.
CHAIN LUBRICANT
Proper lubrication of the chain while in operation reduces
friction between the chain and the guide bar to a minimum
and assures a longer service life.
use bar and chain oil of high quality for this purpose.
Do not use used or reclaimed oil to avoid various oiler
problems.
Use ECHO bar and chain oil.
When ECHO bar and chain oil is not available:
Use motor oil, etc.
Use bar and chain oil of the following grades:
SAE NO. 30 ..... in summer
SAE NO. 10 ..... in winter or when cutting resinous trees.
When refueling, also refill chain oil.
OPERATION
WHEN THE ENGINE IS COLD
Fill the fuel tank with fuel.
Fill the chain oil tank with lubricant.
Turn switch to “RUN” position.
Pull choke all the way out. (Close position)
Push purge bulb 3 to 4 times
Pull starter handle several times until first firing sound. (Hold
machine with your knee.)
Push choke all the way in. (Open position)
Pull starter handle again.
Oil
Gasoline
Fuel/oil tanks are indicated by the following illustrations on
the tanks.
FUEL TANK OIL TANK
TANK INDICATION
START / RUN
STOP
On / Off switch
On / Off switch
START / RUN
STOP
Fuel Mix Chart
50:1
).S.U()CIRTEM(
SAGLIOSAGLIO
.laG.zo.lFretiL.cc
1
2
5
6.2
1.5
8.21
4
8
02
08
061
004