Filter
Top Products
Page 12
GetEarthquake.com
800-345-6007
OPERATOR INSTRUCTIONS AND PARTS
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE
SERVICING THE ROTOTILLER
The following information will help you make the necessary checks
and perform the procedures required to follow the normal care
recommendations made for your rototiller unit.
If you prefer, your local authorized dealer can make these checks and
perform the required procedures for you.
MAINTENANCE AND STORAGE
MAINTENANCE SCHEDULE
Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you
with years of reliable operation.
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
Maintenance Operation Page
Before
Each Use
50 hours or
Every Season
Check belt tension 13 X
Change forward belt 13 X
Engine maintenance 14 X X
Check oil level/change oil 14 X 2
Clean tine axle shaft 14 X
Lubrication 14 X
Check throttle control adjustment - 1
EM = See engine manual
1 Adjust throttle control after first three hours of operation or if engine is hard to start or run-on occurs.
2 Change oil after the first five to eight hours of use, then after every 50 hours or every season. Change oil every 25
hours when operating under heavy load or in high temperatures.
WARNING
!
To prevent accidental starting:
Engine must be turned off and cool, and spark
plug wire must be removed and secured from
spark plug before checking and adjusting engine
or equipment.