Dynasty Spas D-1000 Hot Tub User Manual


 
19
This valve will allow the water flow control of neck
and shoulder jets located in the trilogy / ultrassage
seats. A simple turn of the pointer toward the seat
will increase to the maximum output allowed.
Another turn of the point - away from the seat will
decrease / turn off the neck / shoulder jets. Each
individual jet is also independently adjustable.
This valve controls the output of
the pump to either side of the spa,
or it may operate all jets if left in
the middle position. The purpose
of this valve is to increase or de-
crease the output of one side or
another for maximum or minimum
water flow in case of one or two
person usage. This valve is also
used to turn the master massage
jet on and off.
Each spa is equipped with
2 air controls (venturies),
located next to the equipment
controls. The purpose of these
controls is to regulate the
mixture of air and water to flow
through the jets. If optional
blower is installed, air is also
pushed through the air venturies for maximum output. If your spa has
a master massage jet located in the foot well, the spa will be equipped with 3 air
controls, as pictured.
The third control oper-
ates the same as the
other two.
Mini Diverter Valve
Air Venturies
Diverter Valve
Air Venturies & Diverter Valve Controls