Filter
Top Products
45
Extract from the spare parts list
Use only original DOLMAR parts. For repairs and
replacement of other parts, see your DOLMAR service center.
Pos. DOLMAR-No. Qty. Denomination
1 412 030 661 1
Sprocket nose bar 3/8”, 12” (30 cm)
412 035 661 1 Sprocket nose bar 3/8”, 14” (35 cm)
412 040 661 1 Sprocket nose bar 3/8”, 16” (40 cm)
1 412 030 061 1 Sprocket nose bar 3/8”, 12” (30 cm)
412 035 061 1 Sprocket nose bar 3/8”, 14” (35 cm)
412 040 061 1
Sprocket nose bar 3/8”, 16” (40 cm)
2 528 092 046 1 Saw chain 3/8“ for 12” (30 cm)
528 092 052 1 Saw chain 3/8“ for 14” (35 cm)
528 092 056 1 Saw chain 3/8“ for 16” (40 cm)
1 414 033 141 1 Sprocket nose bar .325”, 13” (33 cm)
414 038 141 1 Sprocket nose bar .325”, 15” (38 cm)
414 045 141 1 Sprocket nose bar .325”, 18” (45 cm)
2 512 484 056 1 Saw chain .325“ for 13” (33 cm)
512 484 064 1 Saw chain .325“ for 15” (38 cm)
512 484 072 1 Saw chain .325“ for 18” (45 cm)
3 952 010 130 1 Chain protector for 12"-14” (30-35 cm) (3/8”)
952 010 140 1 Chain protector for 16” (40 cm) (3/8”)
952 020 130 1 Chain protector for 13” (33 cm) (.325”)
952 020 140 1 Chain protector for 15”-18” (38-45 cm) (.325”)
4 941 719 131 1 Universal wrench SW 19/13
5 940 827 000 1 Offset screwdriver
6 944 340 001 1 Carburetor screwdriver
7 320 163 447 1 Fuel lter
8 181 114 202 1 Fuel tank cap, cpl.
9 963 229 036 1 O-Ring 29,3 x 3,6 mm
10 195 160 050 1 Return spring pack, complete
11 195 160 030 1 Spring
12 195 160 020 1 Driver
13 195 160 060 1 Starter cable 0,14”x35,4” (3,5x900 mm)
14 965 603 021 1 Spark plug
15 181 114 202 1 Oil tank cap, cpl.
16 963 229 036 1 O-Ring 29,3 x 3,6 mm
17 195 173 100 1 Air lter (nylon)
18 195 213 100 1 Sprocket guard, cpl.
195 213 150 1 Sprocket guard (with fast tensioner), complete
19 923 208 004 2 Hexagonal nut M8
20 181 223 310 1 Clutch drum cpl. .325“, 7-tooth
195 223 310 1 Clutch drum cpl. 3/8“, 6-tooth
21 181 224 081 1 Cup washer
22 927 408 000 1 Circlip
23 195 174 280 1 Spark arrestor screen
Accessories (not delivered with the chain saw)
25 953 100 090 1 Chain gauge
26 953 004 010 1 File handle
27 953 003 100 1 Round le, dia. 11/64” (4,5 mm)
28 953 003 070 1 Round le, dia. 3/16” (4,8 mm)
29 953 003 090 1 Round le, dia. 5/32” (4,0 mm)
30 953 003 060 1 Flat le
31 953 030 030 1 File holder 3/8“
32 953 030 030 1 File holder .325“
33 950 233 210 1 Tachometer
- 949 000 035 1 Combined can
(for 5l fuel, 2.5l chain oil)
PS-350
PS-420