Dixon ZTRCLASSIC Lawn Mower User Manual


 
13
SPECIFICATIONS
ZTR Classic
CHASSIS: 11 GA welded rectangular tubing
BODY: All body parts made of high density polyethylene. Dent
and corrosion resistant. Front body contains access
panel for battery service.
MOWER DECK: 13 GA stamped steel construction. Three blades
combine for a 42 cut width. Cut height approximately
1- 4 via 7-position lift handle.
BLADE DRIVE: Electric clutch.
TRANSMISSION: Each rear wheel is independently driven by chain and
sprockets through a mechanical friction drive.
ENGINE: 14.5 HP Briggs & Stratton Intek, 4-Cycle, Single Cylinder,
Overhead Valve, Air-Cooled, Gasoline, Vertical Shaft with
Cast Iron Cylinder, AVS (Anti-Vibration System), Pressure
Lube & Filter.
STARTING SYSTEM: Electric by key switch operation with safety interlock
blade drive.
TIRES: Front 11 x 4.00-5 ribbed tread.
Rear 18 x 8.50-8 Turf Trac R/S
RECOMMENDED Front 16-21 PSI
TIRE PRESSURE: Rear 8-14 PSI
CAPACITIES: Fuel 2.4 gallons total
Engine 1.5 quarts oil
DIMENSIONS: Width 47 outside rear wheel measurement
Height 42 to top edge of seat
Length 72 hitch tab to front bumper
Weight 520 lbs.
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE