Dixon ZTR 7525 Lawn Mower User Manual


 
23
OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS(engine has been operated):
1. Move throttle control lever to 1/4 to 1/2 setting.
2. Insert ignition key and turn to START position.
When engine starts, release ignition key. Key
will return to RUN position.
3. Move throttle control lever to the wide open or
maximum setting for actual operation of the
mower deck.
Note: Model ZTR 7525 may require a partial
choke setting to start even if the engine
has been operated for a period of time.
4. Engine must be operated at wide open or
maximum setting to ensure adequate lubrication,
cooling and cut quality of the mower deck.
DO NOT operate the engine in an
enclosed area due to the harmful
exhaust gas produced.
Notes: On initial operation, set throttle at slow speed.
Engine cannot be restarted when blades are
engaged.
Safety switches stop engine when operator
leaves seat while mower blade is engaged.
Always turn engine off when leaving mower.
CAUTION