Dixon ZTR 7523 Lawn Mower User Manual


 
13
SPECIFICATIONS
7500 Series
CHASSIS: Folded sheet metal and rectangular tube
BODY: Folded sheet metal
SEAT: Designed for operator comfort with padded back and arm rests.
Seat is adjustable fore and aft.
MOWER DECK: Two decks are available. Both decks are made of 10 GA
fabricated welded construction with 7 GA reinforcement plate.
Three blades combine for either a 52" or 60" cut width. Cut
height approximately 1.5" to 5" via 7 position lift handle.
BLADE DRIVE: Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear
BDP 10A pump and a HydroGear HGM-15E hydraulic motor.
ENGINE: 23HP Kohler Command, 4-Cycle, V-Configuration, Overhead
Valve, Air-Cooled, Gasoline, Vertical Shaft, Aluminum Head, and
Crankcase with Cast Iron Liners, Full Pressure Lubrication/Full
Flow Filter, Pulse-type Fuel Pump, Fixed Jet Carburetor w/
Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual Element
Air Cleaner.
STARTING Electric by key switch operation with safety interlocks on parking
SYSTEM: brake and blade drive clutch.
TIRES: Front 13-5.00x6
Rear 23-9.50x12
RECOMMENDED Front 12 lbs.
TIRE PRESSURE: Rear 12 lbs.
CAPACITIES: Fuel - 11 gallons (approx)
Hydrostat oil system - 4 qt with in-line 40 micron filter
Hydrostat oil recommendation, refer to page 31
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS: Width 61"(52" Deck), 69-1/2"(60" Deck)
Height 43"
Length 81" (52” Deck), 81” (60” Deck)
Weight 915 lbs.(48" Deck), 916 lbs.(60" Deck)
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE