Dixon ZTR 6025 Lawn Mower User Manual


 
Page 16
CONTROLS
BLADE DRIVE:
Located on the control panel to the operator's right.
To engage blades pull switch up.
To disengage blades push switch down.
CIRCUIT BREAKER:
Located on the control panel to the operator's right.
Protection of the electrical system is by (2) 30 amp circuit breakers.
If circuit breaker trips, push button to reset.
If this condition repeats, consult dealer for inspection and repair.
MOWER DECK CUT HEIGHT LIFT LEVER:
Located to the right and front of the operator.
Controls the cutting height.
Nine positions of adjustment.
Depress trigger and move lever forward to lower deck.
Depress trigger and pull lever back to raise deck.
NOTE: To achieve a 1" to 3" cutting range, the bar connecting the deck lift handle
and the rear of the deck must be in the first hole. To achieve a 3" to 5" range, the bar
connecting the deck lift handle and the rear of the deck must be in the second hole.
NOTE: Always use high position for transport.