Filter
Top Products
CARE AND MAINTENANCE - 5000 SERIES MODELS
NOTE: Be sure blade is centered on pilot before tightening bolt to 60 ft. lbs. torque.
BELT TENSION
ENGINE TO MOWER DECK BELT:
Models ZTR 5423 & ZTR 5502 P/N 6111
Model ZTR 5601 P/N 6939
The engine to mower deck drive belts are automatically held in proper tension by
springs which push the deck assembly forward and do not require any additional
adjustment to be made.
MOWER DECK SERPENTINE BELT:
Model ZTR 5423 P/N 6109
Model ZTR 5502 P/N 1300
Model ZTR 5601 P/N 6938
Refer to illustration for adjustment procedure.
NOTE: Belt deflection or movement should be approximately 1/4" when measured at
mid-point between pulleys.
Periodically inspect both belt and idler systems.
Page 26