Dixon ZTR 5005 Lawn Mower User Manual


 
47
CARE AND MAINTENANCE
Adjustment of the drive system is limited to the actual function of the
hydrostatic transmissions as outlined below.
T-BOX TO HYDROSTAT BELT ADJUSTMENT:
Tighten the (2) J-bolts on the T-box mounting plate until
each belt has 1/8th to 1/4th of free play or move-
ment at a mid-point between the pulleys on the
hydrostats and T-Box.
Each hydrostat has a bypass relief pin located at the
rear of the hydrostatic unit. A bypass keeper is
provided to allow the mower to be rolled around without
engine running. To accomplish this, the bypass keeper
spring must be positioned to depress the bypass relief
pins. Remove bypass keeper springs prior to actual
operation of the mower.