Dixon ZTR 4516 Lawn Mower User Manual


 
18
BLADE DRIVE:
Located on the control panel, on operator’s right.
To engage the mower blade, pull up on the switch.
To disengage mower blade, push down.
CIRCUIT BREAKER:
Protection of the electrical system is by (1) 15 amp
circuit breaker.
If circuit breaker trips, push button to reset.
If this condition repeats, consult dealer for
inspection and repair.
THROTTLE CONTROL LEVER:
Located on control panel to operator’s right.
Throttle control for engine speed.
Choke for engine starting (omit for 4518).
Throttle control should be set to MAXIMUM or wide
open setting to insure adequate cooling of the
engine and to maintain mower deck blade speed
while mowing.
CHOKE CONTROL (4518 only):
Located on control panel to operator’s right.
Choke for engine starting.
MOWER DECK CUT HEIGHT LIFT LEVER
:
Located to the left of the operator.
Controls the cutting height.
Seven positions of adjustment.
Move lever in and forward to lower.
Move lever in and back to raise.
NOTE: Always use high for transport.
4515 & 4516
4518
CONTROLS