Dixon ZTR 4515 Lawn Mower User Manual


 
14
Model ZTR 4515, 4516 & 4518
Chassis: Twin 12 gauge side frames and 7 gauge transmission and engine
base plate.
Body: All body parts made of high density polyethylene.Dent and
corrosion resistant.
Mower Deck: 42” Deck: 13 GA stamped steel construction-42” cut width
50” Deck: 11 GA fabricated construction/reinforcement ribs-
50” cut width
Blade Drive: Electric clutch.
Transmission: Each rear wheel is independently driven by a Hydro Gear IZT
hydrostatic drive.
Engine:
Model 4515: 15.5 HP Briggs & Stratton Vanguard, 4 cycle, single cylinder,
overhead valve, air cooled, gasoline, vertical cast iron cylinder,
pressure lube w/spin-on filter.
Model 4516: 16 HP Kohler Command 460 cc, single cylinder, overhead valve,
air cooled, gasoline, full pressure lube with oil filter, vertical
shaft, aluminum head & block with cast iron cylinder liner.
Model 4518: 18 HP Kohler Command, twin cylinder, overhead valve, air cooled,
gasoline, full pressure lube with oil filter, vertical shaft, aluminum
head & block with cast-iron cylinder liners.
Starting System: Electric-key switch operation w/safety interlock blade drive.
Tires: Front 11 x 4.00-5 ribbed tread (16-21 PSI)
Rear 18 x 8.50 x 8 4 ply turf tread (8-14 PSI)
Capacities: Fuel 2.7 gallons
Engine Oil B&S 1.5 quarts
Kohler 2 quarts
Dimensions: Width 44” maximum track width
Height 42” to top edge of seat
Length 72” hitch tab to front bumper
Weight power unit: 463 lbs
with 42” deck 547 lbs
with 50” deck-603 lbs
Note: Additional information provided in service instructions under the
individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
SPECIFICATIONS