Filter
Top Products
43
CARE AND MAINTENANCE
ELECTRICAL SYSTEMS
Keep all connections clean and tight.
CLEANING THE MOWER
Wash mower periodically. Clean above and below deck.
High pressure washing and alkaline based soaps can cause
damage to bearings and other parts of the mower. After
washing your mower, start the engine and engage the mower
deck for a few minutes to disperse any water that may have
accumulated in bearings, pulleys or fans.
NOTE: Allow mower to cool before washing. If bearings are hot,
they will draw moisture inside as they dry and cause
corrosion.
SERIAL NUMBERS
The serial number is located on frame at rear of engine.
WARRANTY
Refer to warranty information (page 15).
PARTS/SERVICE
See your authorized Dixon dealer for replacement parts,
warranty or service.