Filter
Top Products
15
SPECIFICATIONS
Model ZTR 3363
CHASSIS: Twin 12 gauge side frames and 7 gauge transmission
and engine base plate.
BODY: All body parts are made of rotational molded polyethyl-
ene. Front body contains access panel for battery
service. Seat tilts forward to allow transmission service.
MOWER DECK: 11 GA Laser Cut Fabricated - 36" Cut Width. Cut height
approx. 1" to 4" via 7 position lift handle.
BLADE DRIVE: Electric clutch.
TRANSMISSION: Each rear wheel is independently driven by chain and
sprockets through a friction mechanical drive.
ENGINE: 14.5 HP Briggs & Stratton Intek,4-Cycle, Single Cylinder,
Overhead Valve, Air-Cooled, Gasoline, Vertical Shaft,
Cast Iron Cylinder, AVS (Anti Vibration System), Pressure
Lube & Filter
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive.
TIRES: Front 11 X 4.00 -5 ribbed tread.
Rear 18 X 8.50-8 Multi Trac tread.
RECOMMENDED Front 16-21 PSI
TIRE PRESSURE: Rear 8-14 PSI
CAPACITIES: Fuel 2.0 gallons
Engine 1.25 quarts
DIMENSIONS: Width 43.0" outside rear wheel measurement.
Height 36.0" to top edge of seat.
Length 65.5" hitch tab to front bumper.
Weight 500 lbs.
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.