Filter
Top Products
OPERATION INSTRUCTIONS
The safe and successful operation of the 3000 Series Models will depend upon the operator
having the correct knowledge of all controls used on the mower and making good judgements
about the terrain to be mowed.
NEVER allow anyone to operate the mower without complete knowledge of all controls and
their
functions.
Sound judgement by the owner will prevent accidents.
BEFORE OPERATING MOWER:
1. Read engine manufacturer's operating and maintenance instructions.
2. Discuss proper maintenance with your dealer.
3. Read and observe all safety instructions on your mower and in the manual.
,
;
4. Check engine oil.
5. Check gas cap to be sure it is in place.
, , 6. Be sure parking brake is on.
7. Mower blade drive is off.
' 8. Know how to stop engine. (Turn key to off position)
STARTING INSTRUCTIONS:
1. Move throttle control to "Choke" position if engine is cold, full throttle if warm.
2. Insert ignition key and turn to "Start" position. When engine starts, release ignition
key. Key will return to "Run" position.
3. Move throttle from "Choke" to desired speed position.
NOTE: On initial operation, set throttle at slow speed.
Engine cannot be restarted when blade is engaged or the parking
blade is
off.
"S,
Safety switches stop engine when operator leaves seat while mower
blade
is engaged.
Always turn engine off when leaving mower. DO
NOT rely on safety switches.
Page 15