Dixon 3000 Series Lawn Mower User Manual


 
Page 29
CARE AND MAINTENANCE
HOT oil may cause burns.
Allow engine to cool before draining oil.
CHANGING THE ENGINE OIL:
1. The "Dapco" oil drain valve is located on the left side of the engine crankcase.
2. Place a suitable container under the drain valve. The fitting of a short piece of hose
will help direct the oil.
3. To drain turn hex head valve stem counter clockwise with 10mm wrench or socket.
Open to full open (approximately 7 turns).
4. After engine is drained tighten hex stem.
NOTE: Refer to engine manufacturer's recommendations for frequency of oil
changes.
OIL FILL:
1. Drain oil.
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended by the engine
manufacturer in engine literature.
CAUTION
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
Hex Head Valve Stem