Dixon ZTR 30 Lawn Mower User Manual


 
SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
SpeedZTR™ 30
Chassis: 11 gauge welded channel frame
Body: Body parts are made of rotational molded polyethylene.
Mower Deck: 11 gauge stamped steel construction. Single 30” cut
blade. Cut height approximately 1-1/2” - 4” via 7-
position lift handle.
Blade Drive: Mechanical; hand lever engagement.
Transmission: Each rear wheel is independently driven by a Hydro
Gear EZT self contained hydrostatic drive.
Engine: 13 HP Briggs & Stratton Intek, 4-cycle, single cylinder,
air-cooled, gasoline, vertical shaft, aluminum head and
block, cast iron sleeve, AVS balanced.
Starting Electric-key switch operation with safety interlock
System: on parking brake, steering levers and blade drive.
Tires: Front 11 x 4.00-5 smooth tread (16-21 PSI)
Rear 18 x 6.50-8 turf tread (8-14 PSI)
Capacities: Fuel .75 gallon
Engine Oil 1.25 quarts
Dimensions: Width 33.5” outside rear wheel measurement
Width 38” overall width of deck with deflector
Height 40.25” to top edge of seat
Length 67” hitch tab to front
Weight 393 lbs.