Filter
Top Products
18
CONTROLS
PARKING BRAKE:
The parking brake is designed to hold the mower from
moving and is not intended for use in stopping the mower
while it is in motion.
CAUTION Engage parking brake before starting
engine.
TO SET PARKING BRAKE:
The hand operated brake is located at the left hand side of
the mower.
To engage brake, pull lever up (to the rear).
To release brake, move lever forward (down).
Note: Always set parking brake before dismounting.
Release parking brake before moving mower.
HYDRO GEAR SYSTEM:
Allows the mower to turn on its own axis (zero turning
radius).
Each lever controls one side of the mower.
Note: The pressure required to operate the mower is
very light.