Filter
Top Products
DRIVE CHAIN
When properly adjusted, the slack span at the mid-point of the chain
should have a total possible movement perpendicular to the chain of
about 9/16". Replace chain when rollers become loose, chain breaks,
or chain fails to operate properly.
Proper lubrication is important for effective roller chain oper
ation. Use
high quality lubricating oil (do not use grease or extra heavy oil) and
apply drops of oil to the chain joints every
10-15 hours of operation.
FRONT CASTER ASSEMBLY
Each caster assembly has a grease fitting located on the under side of
the bearing. For best results, use any good multipurpose grease every
10 - 15 hours of operation.
All other bearings on your mower are sealed and require no
lubrication.
WHEELS AND TIRES
Correct tire pressure is essential to the correct operation of the
machine. The correct pressure for the rear drive tires is 8-10
Ibs. for
size 18 x 9.50-8 and 12-14 Ibs. for size 16 x 6.50-8 tires.
The front tires
should be inflated to 20-24 Ibs. Lug nuts should be checked periodically
to assure they are tight.
ELECTRICAL SYSTEMS
Keep all connections clean and tight. Maintain the fluid in the
battery at
correct level.
BODY
The body may be washed with a mild detergent and waxed
with any
automotive type wax.
TRANSAXLE
For adjustment or repair confer with authorized Dixon dealer
service
department. Adjustment or repair by other than authorized dealer voids
warranty.
PARTS / SERVICE
See your dealer for replacement parts, warranty or any service. For
further information concerning specific models, see the Technical Data
Brochure that is included in owner's packet.