Filter
Top Products
OPERATION INSTRUCTIONS
25
PARKING BRAKE SWITCH TEST:
a) Put parking brake in OFF position
b) Turn ignition switch to START
Engine should not turn over or attempt to start.
BLADE DRIVE SWITCH TEST:
a) Put parking brake in ON position
b) Engage blade drive switch.
c) Turn ignition switch to START.
Engine should not turn over or attempt to start.
SEAT SWITCH TEST:
a) In a safe area away from bystanders, start the
engine.
b) Engage blade drive switch.
c) Raise slightly off seat.
Engine should STOP!
NOTE: If any safety check fails, do not operate the
mower until the system has been checked and repaired
by an Authorized Dixon® Dealer!
TESTING OF SAFETY INTERLOCK SYSTEMS:
Failure to observe the following testing instructions
could result in serious injury or death.
The following tests should be performed at the start
of each mowing day.