Filter
Top Products
English-52
MAINTENANCE
Cleaning and Washing
Regular cleaning and washing, especially
under the mower deck, will increase the
machine’s lifespan. Make it a habit to clean
the machine directly after use (after it is
cooled), before the dirt sticks.
Do not spray water on the top of the mower
deck. Use compressed air to clean the top
side of mower deck. Regularly clean deck
and underside of the deck with normal water
pressure. Do not use a high pressure washer
or steam cleaner. Avoid spraying engine and
electrical components with water
Do not rinse hot surfaces with cold water. Let
unit cool before washing.
Caster Wheels
Check every 200 hours. Check that wheels
rotates freely. If wheels do not rotate freely
take the unit to your dealer for service.
Foam filled tires or solid tires will void the
warranty.
Removal and installation of caster wheel
1. Remove nut and caster bolt.
2. Pull the wheel out of the fork and take
care of the sleeve.
3. Install in reverse order. Tighten caster
bolt.
Hardware
Check daily. Inspect the entire machine for
loose or missing hardware.
8050-092
Cleaning
Use protective glasses when
cleaning and washing.
1
2
3
Caster wheels
1. Nut
2. Bolt
3. Sleeve
8050-159
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam
fill material to the tires. Excessive loads
created by foam filled tires will cause
premature failures.
Only use O.E.M. specified tires.