SPECIFICATIONS
22
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
RAM MAG SERIES™ 50 Model 968999562
1½" square tube side frame
Made of 11 gauge fabricated welded construction
with external reinforcement ribs. Three blades
combine for a 48" (122cm) cut width. Cut height
approximately 1½" (38mm) to 4" (114 mm).
Electric clutch
Each rear wheel is independently driven by a
Hydro Gear ZT2800 hydrostatic drive with integral
charge pump and 7" cooling fan.
20 HP Honda, twin cylinder, overhead valve, air
cooled, gasoline, full pressure lube with oil filter,
vertical shaft, aluminum head & block with cast-
iron cylinder liners.
Electric-key switch operation with safety interlocks
on park brake and blade drive clutch.
Front 11 x 4.5 x 5 smooth tread 15 PSI
(103 kPa)
Rear 18 X 9.5 X 8 Turf pneumatic 15 PSI
(103 kPa)
Fuel 4.9 gallon (19 liters) approximately
Engine Oil 2 qts. (1.8 liters) SAE 10W30
with filter
Width 50" (112 cm)
Height 40" (102 cm)
Length 72" (183 cm)
Weight 605 lbs. (274 kg)
Chassis:
Mower Deck:
Blade Drive:
Drive System:
Engine:
Starting
System:
Tires:
Capacities:
Dimensions: