Filter
Top Products
English-61
LUBRICATION
9. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and lubricate with
a grease gun, one zerk, until grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
IMPORTANT INFORMATION
Use minimal lubrication and remove
excess lubricant so that it does not come
into contact with belts or belt pulley drive
surfaces.
10. Steering Control Shafts
Tip the driver’s seat.
Lubricate with a grease gun, one zerk for each
steering control shaft, until the grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
11. Mower Deck Struts
Lubricate with a grease gun, one zerk for each strut,
until the grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
The belt adjuster grease nipple
8011-573
Lubricating the steering control shafts
8011-578
Lubricating struts
8011-577-1