Filter
Top Products
6
Assembly Instructions
Front Weight Bar
Tools Required
Ratchet with
3
/
8
" Socket
3
/
8
" Wrench
Mounting Instructions
• Using the weight keepers, attach front weight bar
to mower at the front caster arms.
• Secure front weight bar to mower frame with four
3
/8" x 1¼" hex bolts, four
3
/8" flat washers, and four
3
/8" nyloc nuts.
• Place all front weights on front weight bar.
• Place hold-down bar over front weights and secure
to front weight bar using two
3
/8" x 1" clevis pins
and two hair pins.
CAST COUNTERWEIGHT
WEIGHT BAR HOLD DOWN
FRONT WEIGHT BAR
WEIGHT KEEPER
8059-011
4 - Maintenance and Storage
• Stop engine and disconnect spark plug wire. Wait
for all movement to stop before adjusting,
cleaning, or repairing.
• Clean grass and debris from muffler and engine to
help prevent fires. Clean up oil or fuel spillage.
• Let engine cool before storing and do not store
near sparks or open flame.
• Shut off fuel while storing. Do not store fuel near
flames or drain indoors.
• Never allow untrained personnel to service
machine.
• Keep hands and feet away from moving parts. If
possible, do not make adjustments with the
engine running.
• Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
SAFETY INFORMATION