Filter
Top Products
7
STRAP
LANYARD
SUPPORT
BRACKET
ASSEMBLY
Collection System
Tools Required
Ratchet
Torque Wrench
½" Wrench
½" Socket
9
/16" Wrench
9
/16" Socket
5
/8" Socket
1. Open the mounting kit box and remove all of the
components.
2. Place the support bracket on the frame and
secure with (2) 539 990563,
3
/8 x 1 bolts and (2)
539 976979,
3
/8 nyloc nuts.
3. Place the hitch brackets on the frame and secure
with (3) 990622, ½ x 1¼ bolts and (3)
539 101331, ½ nyloc nuts.
4. Place the hitch assembly on the ground behind
the mower. Place the (2) hitch pins thru the hitch
and the hitch brackets. Secure the hitch pins with
the (2) hairpins that are secured with the (2)
lanyards.
5. Install the two (2) straps on the hopper with ½"
bolts and nuts. Install the two (2) support
brackets on the frame.
6. Attach hose support rod to the right side of the
unit to keep the right rear tire from rubbing the
hose.
HITCH BRACKET
SUPPORT BRACKET
HITCH ASSEMBLY
LANYARD
HITCH PIN
.
¾" Socket
Flat Screw Driver
5
/32" Allen Wrench
Hacksaw
11
/32" Drill Bit
Drill
8059-009
8059-010
8059-011a