Filter
Top Products
17
This operator’s manual describes the Dixon Zero Turn
Rider. The rider is tted with a Briggs & Stratton 16
HP* four-stroke overhead valve engine.
Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the ow is regulated and thereby the
direction and speed.
Cutting height handle1.
Park brake2.
Choke/throttle control3.
Ignition switch4.
Motion control levers5.
Blade control lever6.
Fuel tank cap7.
Fuel shut off valve8.
Bypass linkage9.
Control Locations
8058-070
*The power rating of the engines indicated is the average
net power output (at specied rpm) of a typical production
engine for the engine model measured to SAE standard
J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed
in the nal machine will depend on the operating speed,
environmental conditions and other variables.