Filter
Top Products
Page 24
CUTTER BLADE MAINTENANCE:
NOTE: Observe proper blade position prior to removal.
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade nut and remove blade.
4. When replacing blade, tighten blade nut securely. Refer to diagram.
CAUTION
CARE AND MAINTENANCE
Wear heavy, thick gloves when holding onto cutter blade.
Avoid touching the sharp edge of the blade.
NOTE: BE SURE BLADE IS CENTERED ON PILOT BEFORE TIGHTENING NUT
TO 60 FT. LBS. TORQUE.
Threaded end of Blade Shaft
Trash Guard
Mower Blade
Nut