Filter
Top Products
9
ASSEMBLY
3
CONTAINER MOUNTING
1. Install container, centering between support
tubes.
NOTE: One container should always
overlap the other container at supports.
2. Close cover and lock latch handles over
center support tubes.
WARNING
DO NOT operate mower unless container is
properly installed. Container is subject to
wear and deterioration, check containers
frequently, replace when cracked or dam-
aged. Use only a recommended replace-
ment container.
Cover Latch
Handle
Support
Tubes
Container
Bags
4
ADAPTER BRACKET
1. Turn mower engine off.
2. Remove grass deflector on mower by remov-
ing hair pin cotter, spring and deflector pin.
The deflector and hardware should be stored
for when the grass catcher is not used.
3. Attach adapter bracket to the deck with the
bolts and nuts removed in Step 2. See illustra-
tion.
Reuse Nuts
Reuse Bolts
Grass Bagger
Adapter Bracket
Deflector
Bracket
Adapter Bracket
Attached
CAUTION
Before removing deflector shield, turn
mower engine off.