Filter
Top Products
9
ASSEMBLY
FIGURE 3
KODIAK
1. Remove clamshell from crate.
2. Remove two 5/16 x 3/4 carriage bolts from
the lower flange of the rear guard on the
mower.
3. Place (539 114815) Mount Bracket, Lower
in place and secure using four (539 111785)
3/8 x 3/4 carriage bolts, four (539 976979) 3/
8 nyloc hex nut and two (539 107271) 5/16 x
1 carriage bolts. Reuse the two 5/16 nyloc
hex nuts previously removed from the 5/16 x
3/4 carriage bolts. See Figure 4.
4. Secure two (539 114811) Bracket, Support
to frame as shown in Figure 5. Secure us-
ing (539 103433) 1/2 x 3 1/4 hex bolt and
(539 101331) 1/2 hex nyloc nut.
REAR GUARD
539 114815 MOUNT BRACKET, LOWER
LOWER FLANGE
FIGURE 4
FIGURE 5
539 114811 BRACKET, SUPPORT