Filter
Top Products
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any multi blade
mower. Type and condition of grass, ground speed, blade speed, and conditions
are some of the variables that interact creating differences in cut quality
results. In most cases, a smooth, even cut will be achieved without further
adjustment.
The Trouble Shooting Chart suggests practices and adjustments that may be
helpful in improving cut quality. Your Dixon ZTR Dealer is also available to
provide assistance to you.
SITUATION
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
CAUSES
Ground speed
Loose belts
Engine RPM too low
Dull or bent blades
Unlevel mower deck
Grass build-up under
mower deck
Improper blades
Uneven tire pressures
REMEDY
Reduce mowing speed
Adjust per operators
manual
Increase engine RPM to
maximum
Sharpen or replace as
required
Adjust per operators
manual
Clean out underside of
mower deck
Replace with original
equipment blades which
are designed for the
Model 501
Check and adjust as
required per operators
manual
Page 22
TROUBLE SHOOTING