Filter
Top Products
CARE AND MAINTENANCE
44
MOWER DECK LEVELING PROCEDURE:
1. Set the tire pressure on all four tires.
2. Move the mower to a hard, level surface and rotate front
casters in the direction of forward travel.
3. Put the mower deck in the mid-range cut height position.
4. Rotate blades so the two outer blade tips each point
outboard.
5. Turn front adjuster nut(s) to level deck side to side.
6. Rotate all blades to run fore and aft.
7. Turn rear adjuster nut(s) until blades are level to 1/4” higher
in the rear.