Filter
Top Products
SPARE PARTS
See your dealer for ordering spare parts
or
warranty service.
REMOVING AND REINSTALLING
MOWER DECK
1. Remove engaging handle by removing bolt
and nut under handle.
2. Disconnect mower deck wire loom from
frame wire loom.
3. Loosen belt keeper located under engine by
loosening two (2) rear engine mount
bolts to
allow mower deck drive belt to come free of
rear pulley. Retighten belt keeper.
4. Remove six (6) attach pins and clips from four
(4) mower deck attach points and two
(2)
stabilizer bars.
5. Mower deck may then be removed from
unit
for service or replacement. To reinstall,
reverse the above procedure.